Mini USB IFs
High-performance USB3.0 connectivity to systems, sensors and cameras
Sensia USB IF’s converts any Digital Parallel Video source into USB Video Class, compatible with most OS (Android, Linux, Win10, Win8, … etc). An additional Serial communication port is provided to communicate with the front-end sensor or any other attached system.
Any doubts? Contact us
Sensia USB IF are designed to run over USB3.0. Besides SENSIA USB IFs systems are compatible with USB2.0. Performance using the USB2.0 interface may be decreased, performance will be sensor dependant due to USB2.0 band width.
Features
Compact and low power
USB Bus Powered
Current consumption (Sensor attached):
- 400mA @ 5V
- 475mA @ 5V
USB3.0 and USB2.0 compatible
- Up to 80MHz parallel LVTTL/LVCMOS video inputs
- Pixel depth range (bits): Up to 14 (8, 10, 12, 14)
- Pixel valid data bits are shifted to the 14 MSB in the 16bits UVC packages
- YUV4:2:2 output format
- UART COM port and DVP in the same compound device
- 2.5 / 3.3 V video input voltage levels
- Compatible with all DPV sensors up to 80MHz PCLK.
- Tested sensors:
- SCD compatible sensors:
- VOxI
- PelicanD (SENSIA Camera Link Adapter required)
- ULIS compatible sensors:
- PICO
- SCD compatible sensors:
- SCD compatible sensors:
- VOxI
- PelicanD (SENSIA Camera Link Adapter required)
- ULIS compatible sensors:
- PICO
- Connector
- Rugged Type-C
- Operating Temperature Range
- -30ºC to 85ºC
- Size (LxWxD)
- Straight Connector: 35mm x 35mm x 21mm
- Elbow Connector:35mm x 42mm x 13mm
- Stack
- Single board
- Sensor Connector
- 80-Pin Samtec
- LSHM-140-02.5-L-DV-A-S-K
- External GPIOs / GPIOs sensor
- 5 / 8
- GPIOs Voltage Level
- 3V TTL signals
- External GPIOs Connector (FCC)
- FH12-8S-1SH (55)
- Power On Indicator Connector
- T1M-02-T-SH-L